Here are some of the ones I've made!
Make a simple pattern out of paper to use as a guide to cut out the material.
Cut 2 pieces of fabric at 8 x 10 inches. Cotton fabric is a good choice, blue jean fabric, dish cloth fabric are other good choices as well.
With right sides together sew the first seam along the top.
Sew about 1/4 of an inch from the edge.
Flip open and lay your string or seam binding along the edge and pin down. As shown above.
Then pin the other two strings at a 1/4 inch from the bottom edge.
You can use string, elastic, shoe strings, draw strings or even make your own by cutting strips of fabric to make a tie.
I used seam binding because that is what I had. I did not want to go to the store to buy elastic because of the stay at home order.
So I highly suggest using what supplies you have at home.
Sew a 1/4 inch seam around the sides making sure you sew over the ends of the sting to secure in place. For the bottom or top seam, which ever way you look at, you want to leave about a 2 or 3 inch opening, so sew about a 2 inch seam then skip about 3 inches and sew another 2 inches to the end.
Look at the top photo to see the dash marks on the paper pattern to give you an idea of where to sew this last seam.
Now that you have sewn all around the edges leaving the opening as shown here, you can now flip it back to right side out.
Tug on the strings to pull them out.
If you were careful while sewing the strings it should come out ok.
If not then you have to rip. LOL
Lets hope not!
Just make sure when you are sewing you only sew the ends of the ties.
Now make the folds or pleats.
Get a ruler, pencil and some pins.
Measure one inch from the top edge and mark with a pencil on both sides.
This mark will give you the point to grab the fabric to make the fold.
Fold over toward yourself about a half inch or so and pin down. I like to iron the folds in place before I sew.
Do this step two more times. Mark one inch down form the bottom of each fold. Pin and iron the folds flat. Then take it to the sewing machine to sew the folds in place.
Sew about an half an inch from the sides.
I do two seams on each side.
You can sew the opening down or leave open to place a filter inside the mask for added protection.
I heard vacuum cleaner bags made great filters.
Cut down to fit inside.
These homemade mask do not protect you from the corona virus!
I do not make any medical claims.
I made these for some local nurses to use over their N95 mask.
There is a run on Etsy to buy these homemade mask as well.
I have chosen to give mine away instead of selling them.
FYI
I made a youtube video to show you how to make a Face Mask.
Here is the link to my video on YouTube
No comments:
Post a Comment